Shop Towbars and Towing Accessories Online – Australia-Wide Delivery
Got a trailer, boat or caravan that needs hooking up? Whether it's a box trailer to the tip or the caravan up the coast, you'll find the right tow ball for your car, ute or 4WD here. Our range covers standard 50mm tow balls, heavy-duty 70mm towballs and high rise designs.
A tow ball bolts to your towbar tongue or ball mount and connects to your trailer's coupling. Replacing a worn tow bar ball or putting together a new tow ball hitch setup? Either way, getting the size, shank and weight rating right is what matters.
Shop online with Australia-wide delivery.
Browse our towballs below and compare sizes, weight ratings and designs to find the one that suits your setup.
Tow balls aren't one-size-fits-all. Before you buy, check three things: the diameter of your trailer coupling, the size of the mounting hole in your towbar tongue or ball mount, and the weight rating of the ball itself.
Get those right and you'll be on your way to choosing a towball that's compatible with your towing setup.
A 50mm tow ball is the go-to for many Australian box trailers, boat trailers and caravans.
If your trailer has a 50mm ball coupling, you'll need a matching 50mm towball. Not every 50mm ball is the same, though, so check the weight rating and shank dimensions before you order.
View TowRite 50mm Towball
A 70mm tow ball is used with compatible heavy-duty trailer couplings.
These bigger towballs are built for specific towing jobs and must only be used with a matching 70mm coupling. Before you buy, check your trailer's requirements, the towball's rating and the specs of your whole towing setup.
View TAG 70mm Tow Ball
High Rise Tow Balls
A high rise towball, also called an extended tow ball, puts the ball higher than a conventional design.
View TowRite High Rise TowballThe shank is the threaded section that passes through your towbar tongue or ball mount. It needs to match the mounting hole and suit the supplied fastening hardware.
Before buying, check the shank diameter, thread length and any mounting requirements from the manufacturer.
Fitting a tow ball properly matters just as much as picking the right one.
Before you start, check that the ball, shank and mounting hardware all suit your towbar tongue or ball mount.
For a conventional bolt-on towball:
Check the mounting surfaces and fastening hardware are in good nick.
Use the correct washer, nut and any other parts the manufacturer specifies.
Tighten the towball with a suitable tool to the manufacturer's specified torque.
Make sure the ball is secure before you hook up your trailer.
Follow the manufacturer's instructions for inspecting and rechecking after use.
Don't guess the torque, and don't assume every towball uses the same fastening setup.
If your towball or coupling needs lubricating, follow the manufacturer's guidance. Some coupling and sway-control systems have specific lubrication restrictions.
Using a removable ball mount? Keep it secure with one of our hitch pin locks.
Your towball needs to match your trailer's coupling. A 50mm coupling needs a compatible 50mm tow ball, and a 70mm coupling needs a compatible 70mm ball. Check the ball's weight rating and shank dimensions before you buy, too.
Not quite. The towball is the rounded metal part that connects to your trailer coupling. A tow ball hitch can refer more broadly to the ball plus the mounting parts that connect your trailer to the vehicle. The ball, ball mount and towbar all need to be compatible.
Look for the capacity stamped on the towball or listed in the manufacturer's product info. It needs to suit your loaded trailer, but it doesn't override the limits of your vehicle, towbar or ball mount. The lowest applicable rating is the one that counts.
A 1 7/8-inch towball isn't the same diameter as a 50mm towball. Australian trailers commonly use 50mm couplings, so never assume the two are interchangeable. Always use a towball that matches the size and requirements your coupling manufacturer specifies.
It can. Some high rise towballs have lower weight ratings as the rise increases. The exact capacity comes down to the product's design and the manufacturer's specs, so check the rating of your particular high rise towball before you use it.
Tighten your towball to the torque its manufacturer specifies, using the right fastening hardware and tools. There's no universal torque setting for every towball, so follow the product instructions and any inspection or rechecking requirements.
Not sure which size, shank or weight rating you need? We're happy to help.
Browse our tow balls online, or give the Speedy Towbars team a call on 1300 773 339. Have your trailer coupling details and towing specs handy, and we'll help you narrow down the options.
Need more gear for the weekend? Explore our full range of towing accessories, including ball mounts and more.